TAIFA--Biogas Generator set

Biogas is a kind of combustible gas produced by microbial fermentation of organic materials under anaerobic conditions, with high calorific value, it is an ideal gas fuel for power generation, the main combustible component is methane CH4, the general concentration of methane is 40-75%, and the rest is carbon dioxide and a small amount of nitrogen, hydrogen, and hydrogen sulfide. Its characteristics are similar to natural gas. Its main raw materials are: garbage, sewage treatment plant sludge, human and animal feces, sewage, plants, crop residues, animal fats and proteins and other organic materials. The material and slag discharged after fermentation by the biogas plant are rich in nutrients and can be used as fertilizer and feed.

Biogas generator sets are mainly used in farms, landfills, sewage treatment plants, pharmaceutical factories, food factories, distilleries, fermentation factories, citric acid factories and paper mills. Biogas power generation is a kind of clean and environmentally friendly green energy promoted by the state, which is a proven energy-saving way to reduce the cost of enterprises and solve the problem of environmental pollution caused by biogas emission, which is beneficial to the country and the people, and has the characteristics of efficiency, energy saving, safety, environmental protection and renewable, etc. It is a kind of widely distributed and inexpensive distributed energy, and the production cost is lower than that of the conventional energy, which is of good market prospect.

Biogas quality requirements: within 1 meter from the inlet valve of the biogas generator set

①Temperature of biogas 10~50℃;

②Biogas pressure 0.5~15Kpa, pressure change rate ≤0.5Kpa/min;

③H2S≤20mg/Nm³;

④NH3≤20mg/Nm³;

⑤Methane content in biogas ≥40%;

⑥Impurity particle size ≤5um, impurity content ≤30mg/Nm³;

⑦Moisture content in biogas ≤ 20mg/Nm³;

⑧Biogas should be processed to achieve no liquid components

TAIFA --Biogas generator set technical parameters

Generator sets: frequency 50HZ, voltage 400V/230V, power factor 0.8, three-phase four-wire system. 60HZ and other speed generator sets can be customized according to customer requirements.